Features.
Multi Format Operation
SDTV :525 / 59.94Hz or 625 50Hz
HDTV: 1080i 59.94Hz / 60Hz / 50Hz/ 720P / 60Hz / 59.94Hz 50Hz / 30Hz / 29.97Hz / 25Hz / 24Hz / 23.98Hz/1080P 30Hz / 29.97Hz / 25Hz / 24Hz / 23.98Hz /1080PSF 25Hz / 24Hz / 23.98Hz
Two Simultaneous Digital Video Outputs.
Each output can have a different test pattern assigned from the internal test pattern library.
8 Channel Audio Test Generator.
8 independent digital audio test signals are provided (20 or 24 bit). Each channel has fully adjustable gain (0 to -60db FS), test tone frequency (20Hz to 20KHz in 1KHz steps), adjustable phase and selectable momentary pause (silence). The 8 audio channels are arranged into 8 x AES streams and can be embedded into both video outputs and also 4 x AES supplied as external signals.
Comprehensive Test Pattern Library.
An internal library of static standard test patterns is included, as well as dynamic patterns including a real time zone plate generator EBU AV Sync audio synchronization pattern and a LCD panel persistence test.
Integrated Compact Flash Slot. (PTG FLASH option)
Load your own patterns using standard DPX files. Requires option code to enable the compact flash slot
Genlock with Cross Lock and Input Timing.
Flexible reference input allows the Testor to genlock to SDTV analog bi-level sync or HD tri-level sync sources (auto detect standard). Cross lock capability allows a SDTV ref sync input to generate a genlocked HD tri-level output sync (and visa versa). Input timing adjustment of one frame is provided adjustable in lines and pixels so the Testor can be genlocked and timed into any system installation.
Word Clock Reference Output.
A 48KHz +5v TTL word clock reference signal is provided for audio applications which require an external reference. Both the video sync and word clock outputs will free run with no reference connected and can be used a sync reference source. With reference sync presence, all video / audio / sync and word clock outputs are frequency locked to reference.
Character Overlay.
User defined character overlay for source identification purposes. Provides 22 characters overlay with selectable font color, background color and screen position. Separate character generator provided for each of the two video outputs.
Integrated Display for Control and Configuration.
A simple monochromatic display is provided which can show the selected test pattern for each output as well as providing the on screen menu and control selections. Control and setup is simple using the integrated rotary / push switch control knob.
Integrated CPU with Flash Ram.
All settings made to Testor are automatically stored in internal flash ram and are preserved through power cycles and long term storage. No loss of module settings should AC power fail or if the module gets accidently disconnected or a battery fail.
PC Interface for Control and Configurations.
As an alternative to the integrated local control it’s also possible to use the standard LYNX RCT 3002 Service Adapter and control Testor using a standard Windows PC or laptop. The on screen GUI to simplifies Testor configuration set-up and control. Settings are stored into internal flash ram. If you already have a LYNX Service Adapter then Testor will be recognized automatically.
Flexible Power Options.
Depending on the application you might choose one or all of the available power options for Testor. Use AC power from a LYNX AC power brick or the LYNX re-chargeable battery belt back, or for mobile production use the convenient Anton Bauer battery adapter which allows the use of any standard camera Anton Bauer battery or use the XLR power adapter for any battery (9-15v).
